Heatcraft Refrigeration Products, LLC
10 episodes - English - Latest episode: almost 16 years ago - ★★★★ - 1 ratingThis is a series of videos covering the installation, startup and maintenance of our commercial refrigeration products.
Homepage Apple Podcasts Google Podcasts Overcast Castro Pocket Casts RSS feed
Episodes
Maintenance
June 16, 2008 13:37 - 29 seconds - 2.15 MB VideoFor long-term equipment operation, periodic maintenance must be performed on a regular basis.
System Adjustments
June 16, 2008 13:34 - 1 minute - 6.48 MB VideoProper adjustments are required for long-term system operation and satisfactory performance.
System StartUp
June 16, 2008 13:23 - 1 minute - 4.59 MB VideoVarious system setups must be performed during initial startup for proper, reliable and effective system operation.
Pre-start Tasks
June 16, 2008 13:13 - 2 minutes - 10.4 MB VideoPrior to starting the equipment, certain tasks must be performed to assure the equipment is ready for a safe and successful startup.
Piping
June 16, 2008 13:10 - 2 minutes - 12.2 MB VideoProper line sizing and installation techniques are needed to assure circulation of refrigerant and lubricants through the equipment.
Wiring
June 16, 2008 13:07 - 19 seconds - 1.36 MB VideoProper wiring steps are required for powering the equipment reliably and safely.
CU Install
June 16, 2008 13:01 - 1 minute - 5.57 MB VideoLocation and mounting of condensing unit is also important for proper equipment operation.
TEV Install
June 16, 2008 12:56 - 1 minute - 6.98 MB VideoProper mounting of the expansion valve, distributor nozzle and solenoid valve are essential for a correct installation to produce desired equipment performance.
Evap Install
June 16, 2008 12:52 - 1 minute - 8.24 MB VideoFor a proper evaporator installation, it is important to follow best-practices recommendations. These are necessary for satisfactory equipment operation and cooling results.
Pre-install Tasks
June 16, 2008 12:43 - 1 minute - 7.67 MB VideoThere are several critical tasks that must be performed prior to equipment installation to assure a successful installation is possible.