ELECTRIFY™ | Electrician Podcast
391 episodes - English - Latest episode: 7 days ago - ★★★★★ - 16 ratingsThe Electrical Industries FIRST weekly Podcast Series is dedicated to Electricians. Please be sure to visit https://fasttraxtube.com and subscribe for a FREE ACCOUNT to listen to all our new podcasts starting March 1, 2024.
Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Homepage Apple Podcasts Google Podcasts Overcast Castro Pocket Casts RSS feed
Episodes
Master The NEC | Let's Talk Article 90 of the 2023 National Electrical Code
September 06, 2022 04:18 - 1 hour - 133 MBListen as Paul Abernathy talks about Article 90, the introduction of the National Electrical Code in this episode of Master The NEC. Paul goes over all the sections in Article 90 and gives an explanation of each of the rules and changes for the 2023 NEC. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 79 | 310.15(b)(1) vs 310.15(b)(2), GFCI Specific Appliance, Another Pool Question
September 06, 2022 01:33 - 48 minutes - 66.5 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more questions submitted via the Let’s Ask Paul Portal at www.PaulAbernathy.com. In today’s episode questions about 310.15(b)(1) versus 310.15(b)(2) was presented. There were also questions again o n the 2023 National Electrical Code changes to 210.8(D) for Ground-fault Circuit Interrupter protection (GFCI) for specific appliances. Lastly, Paul is asked about rumors of the solid 8 AWG copper ring around a swimm...
Let's Ask Paul | Episode 78 | Equipotential bonding grid and Multifamily dwellings questions
August 29, 2022 00:18 - 28 minutes - 38.7 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a few questions submitted via the Let’s Ask Paul Portal at www.PaulAbernathy.com. In this episode, Paul answers a question on the 3’ perimeter grid in 680.26(B)(2) and then tackles a question about 60 amp services to apartments. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 77 | Portable Generators, Sizing Parallel EGC, and Dissection of Questions
August 20, 2022 17:00 - 49 minutes - 67.3 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a few questions submitted via the https://www.PaulAbernathy.com portal. The questions were about portable generators and optional power to dwellings, sizing the EGC for parallel applications and when you must increase the size of the EGC, and lastly Paul answers a question about his method to dissecting an exam question. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician...
Let's Ask Paul | Episode 76 | Voltage Drop Why, HCF Receptacle Locations, and Myers Hubs
August 07, 2022 23:22 - 54 minutes - 74.8 MBWelcome to another episode of Let's Ask Paul, the podcast dedicated to answering your questions on the National Electrical Code. On this episode Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers questions about receptacles in health care facilities and their placements, Myers hubs, and a deep understanding of Voltage Drop and the increasing of the equipment grounding conductor in Article 250. Be sure you visit https://www.ElectricalCodeAcademy.com or follow us on our Y...
Let's Ask Paul | Episode 75 | Number of branch circuits on 15 or 20 and more.
August 03, 2022 03:49 - 25 minutes - 35.5 MBListen as Paul Abernathy answers more questions submitted via PaulAbernathy.com. In this episode Paul answers questions on how to calculate the minimum number of receptacles on branch circuits. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 74 | Cabin Disconnects, GFCI and Dryer Issue, and Lutron Panels
August 03, 2022 03:43 - 34 minutes - 47.3 MBListen as Paul Abernathy answers more questions submitted via PaulAbernathy.com. In this episode Paul answers questions on GFCI issued with Dryer, installing an outside service disconnect for a cabin and multiple Lutron panels and possible tap rules. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 73 | SEU and Bare Conductors and Rods at Detached Structure
July 25, 2022 00:11 - 34 minutes - 47 MBListen as Paul Abernathy answers more questions submitted via the Let's Ask Paul Portal at www.PaulAbernathy.com. Today's question is about what do to when a service panel becomes a remote distribution panel (Subby Bruh) and it has existing SE-U cables. Paul will also answer a question about ground rods at a detached structure as well in this episode. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Electrify Podcast | Going Above the Minimum Standard of the National Electrical Code
July 18, 2022 00:22 - 42 minutes - 57.8 MBListen as Paul Abernathy, the CEO and Founder talks about when is it OK to go above the minimum safety standards of the National Electrical Code. Paul also talks about electrical inspectors and even tells a story about how an electrical inspector died after working one day on the job. If you want or care to know Paul's opinion of going above the NEC then you will enjoy this episode. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/su...
Let's Ask Paul | Episode 72 | Can GFCI Devices protect receptacle and circuits where no EGC Exists?
July 16, 2022 20:25 - 31 minutes - 42.7 MBListen as Paul Abernathy, Certified Master Electrical Code Professional and CEO and Founder of Electrical Code Academy, Inc. answer more questions submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com. In this episode Paul gets asked if a GFCI Device, such as a circuit breaker type or receptacle type OK to protect the branch circuit and receptacle when a non-grounding type is replaced with a grounding type. Become a supporter of this podcast: https://www.spreaker.com/podcast/e...
Let's Ask Paul | Episode 71 | WR on USB Devices, Apology OK, Raceway Studs and more
July 16, 2022 19:25 - 24 minutes - 33.3 MBListen as Paul Abernathy, Certified Master Electrical Code Professional and CEO and Founder of Electrical Code Academy, Inc. answer more questions submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode answers the questions about WR Rated Receptacles in damp or wet locations, does Paul accept a former troublemakers apology, and are stud packs, ganged studs, considered a raceway and more. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrif...
Let's Ask Paul | Episode 70 | 12 AWG and its amps, Motor Tables, and More
July 09, 2022 17:49 - 27 minutes - 38.1 MBJoin Paul Abernathy for another episode of Let's Ask Paul from www.PaulAbernathy.com. In this episode, Paul answers the question of using motor nameplates versus the tables for full load current, and someone asks about the ampacity of a 12 AWG conductor and how to use the various NEC rules. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 69 | Helping answer a Real-World Transformer Sizing Request
July 04, 2022 20:02 - 51 minutes - 70.4 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question from a submission via the Let's Ask Paul Portal at www.PaulAbernathy.com. This podcast answers a question about sizing a transformer to handle a single HVAC Load and all the things to take into consideration when selecting the proper sized transformer. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 68 | Verifying an Electrician's Code References for Fire Incident
June 26, 2022 21:50 - 41 minutes - 57.5 MBJoin Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., a premier electrical code training academy located in Texas. Today's question was submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com and it pertains to validation of NEC code references for a fire incident being inspected by the electrician or electrical inspector. Remember, you can submit your own questions free and easily at www.PaulAbernathy.com Become a supporter of this podcast: https://www.sprea...
Let's Ask Paul | Episode 67 | (2) 100A Panels supplied by 125A Main & More
June 26, 2022 20:27 - 46 minutes - 63.7 MBJoin Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. as he answers another question from those submitted via PaulAbernathy.com and the Let's Ask Paul Portal. In this episode, Paul answers the question about (2) 100 Amps breakers in a 125A Panel as well as explains straight versus slash-rated circuit breakers. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 65 | Paul and Jay Talk about the Schneider Load center Recall
June 19, 2022 20:20 - 40 minutes - 55.2 MBListen as Paul Abernathy and Jay Grundberg chat about the recent recall for the Schneider QO with the plug-on neutral load center recall. With over 1.4 million load centers part of this recall, it is bound to be a costly error for Schneider, also known as Square D. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 66 | Metal Boxes and Equipment Bonding Jumper Question
June 19, 2022 20:12 - 22 minutes - 30.6 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www/PaulAbernathy.com. Today's question was about using an equipment bonding jumper from the metal box to the device instead of taking an equipment bonding jumper from the equipment grounding conductor wirenut where all the EGC's are connected. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/...
Let's Ask Paul | Episode 64 | So you wanna be a Electrical Inspector
June 11, 2022 00:55 - 22 minutes - 30.8 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questions on the Let's Ask Paul Portal a www.PaulAberanthy.com. Today's podcasts answer a question asking for advice on becoming an electrical inspector. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 63 | Ampacity of NM Cable and Subby's Bruh at Detached Garages
June 11, 2022 00:50 - 40 minutes - 56.3 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questions on the Let's Ask Paul Portal a www.PaulAberanthy.com. Today's podcasts answer a question about the ampacity of Nonmetallic-sheathed cable and another about installing remote distribution panels, sometimes called sub-panels, in detached garages or other detached structures. Become a supporter of this podcast: https://www.spreaker.com/podcast...
Let's Ask Paul | Episode 62 | Questions on Exam Prep, Neutral Colors, and Temporary NM Cable
May 20, 2022 13:00 - 44 minutes - 61.2 MBListen as Paul Abernathy, Founder and CEO of Electrical Code Academy, Inc. and creator of the Fast Trax® National Electrical Code Learning System answers more questions submitted via PaulAbernathy.com at the Let's Ask Paul Portal. On this episode Paul answers questions on exam prep in the last 2 weeks, questions on stripes on neutrals, and using NM-B in a specific construction environment. Be sure you subscribe and follow and if you have any electrical exam preparation or code related questio...
Ask Paul | Episode 61 | Sizing Conductors Let's to AC Motor Compressor
May 14, 2022 19:25 - 25 minutes - 35.5 MBListen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.com. This episode answers a submission about conductor sizing for motor compressors for air conditioning systems using the 2020 National Electrical Code. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 60 | Explaining Transformer Protection in 450.3(B)
May 14, 2022 18:09 - 1 hour - 101 MBListen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.com. This episode addresses the overcurrent protection rules for transformers found in 450.3(B) of the 2020 National Electrical Code. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 59 | Understanding 150V or less to ground and 150V or more to ground
May 08, 2022 18:38 - 17 minutes - 24.7 MBJoin Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's Ask Paul, the discussion is about understanding the phrase 150 volts or less to ground and when it says 150 volts or more to ground in the National Electrical Code. If you are interested in the Fast Trax® NEC Learning System to increase your knowledge of the National Electrical Code, then visit www.ElectricalCodeAcademy.net for more information...
Let's Ask Paul | Episode 58 | Receptacle Spacing, Bus Ratings, and Ranges
May 08, 2022 18:33 - 28 minutes - 39.6 MBJoin Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's Ask Paul, the discussion is about kitchen receptacle spacing, range calculations on an electrical exam and so much more. If you are interested in the Fast Trax® NEC Learning System to increase your knowledge of the National Electrical Code then visit www.ElectricalCodeAcademy.net for more information and to join our Fast Trax® Family. Become a...
Let's Ask Paul | Episode 57 | Conductors at Subby's Bruh and Straight/Slash Rated Breakers
May 02, 2022 02:06 - 38 minutes - 52.5 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answer questions submitted on PaulAbernathy.com at the Let's Ask Paul. On this episode we answer questions about conductors to remote panels and chats on slash versus straight ratings. Also, you can submit your questions to www.PaulAbernathy.com Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 56 | To Our Present and Future Students - You Are Why We Do This!
April 25, 2022 01:52 - 20 minutes - 27.9 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode is dedicated to Paul and his heartfelt message to his past, current, and future students. The funding of Electrical Code Academy, Inc. was not about the money. It was about the ability to teach others on a platform that can truly make a difference in so many prospective students’ life. Become a supporter of this pod...
Let's Ask Paul | Episode 55 | Why we don’t just drive ground rods everywhere, like for Receptacles
April 25, 2022 01:43 - 20 minutes - 28.3 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode is dedicated to a question being asked about why an EGC is needed at receptacles and why you just don't drive ground rods at receptacles rather than installing an equipment grounding conductor. This episode address the issue of the Ground Rods Only. For more information on the World's Best Grounding and Bonding Cour...
Let's Ask Paul | Episode 54 | Three Gang and Larger Box Support and More
April 25, 2022 01:35 - 44 minutes - 61.6 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy answers more submitted questions from the Let's Ask Paul Portal at www.PaulAbernathy.com. In this episode Paul answers questions on box supports, most notably those without holes for additional support, and of course the 3' EMT support debate again. Paul also answers a few other questions in this episode as well so tune in to see what gets asked...you never know if the question is yours. Here is the article I referenced in ...
Let's Ask Paul | Episode 53 | Wago's and BackStabbing....Ok Haters....LOL
April 17, 2022 21:55 - 25 minutes - 34.5 MBJoin Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a premier provider of electrical exam preparation training and post licensing electrical code education as he answers a question about the use of WAGO's and backstabbing receptacle devices. For more information on Electrical Code Academy, Inc. visit www.ElectricalCodeAcademy.net to see our programs and try our demos. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--413185...
Let's Ask Paul | Episode 52 | 220.60 Noncoincident Loads Explained.....AGAIN!
April 17, 2022 21:48 - 32 minutes - 44.1 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more questions submitted through the Ask Paul Portal at www.PaulAbernathy.com. This episode someone asks Paul to explain 220.60 for Noncoincident Loads and would like to know his opinion of how it is applied to a multifamily dwelling.
Let's Ask Paul | Episode 51 | Multiwire Branch Circuits, Pigtails, and Listed Wall Mounted Devices
April 17, 2022 02:56 - 19 minutes - 27.2 MBJoin Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a leading electrical educational provide for learning the National Electrical Code as he answers more questions from PaulAbernathy.com. On this episode Paul answers (3) questions, one about a single receptacle outlet as a junction for multiple branch circuits, another about using all the terminals on a duplex receptacle or must you pigtail, and lastly Paul is asked about the use of a listed wall mounted control device for ...
ELECTRIFY | Fast Trax Grounding and Bonding Course - PREVIEW
April 13, 2022 16:58 - 1 hour - 57.5 MBJoin Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he shows an inside look into the 2020 NEC Grounding and Bonding Program. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
ELECTRIFY | Explaining Bonding for Over 250V Systems
April 13, 2022 16:54 - 32 minutes - 29.5 MBWatch as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. explains the rules for bonding branch or feeder circuits that are from systems that are over 250 volts to ground. These systems require a little extra bonding attention when working with these systems. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify...
COFFEE HOUR | Single Motor Branch Circuit Calculations
April 13, 2022 16:52 - 57 minutes - 52.6 MBJoin Paul Abernathy, Master Electrician and Founder and CEO of Electrical Code Academy, Inc. as he explains something seldom seen on an electrical exam, the dreaded ambient correction factor. If you would like to see this video visit https://youtu.be/ey8EnuZ7yGE Also, if you are interested in electrical exam preparation courses and you only want the BEST then visit www.FastTraxSystem.com for more details. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this ...
COFFEE HOUR | Are Kenny Clamps Required
April 13, 2022 16:50 - 1 hour - 57 MB[REPLAY] - Join Paul Abernathy as he talks about Kenny Clamps, and GECs in Ferrous Raceways and Enclosures, Gas Pip Bonding and so much more in this episode of Coffee Hour. FYI - Ukraine CRUSH Russia...Beat Them Into The Earth!!!! To watch this VIDEO go to www.Youtube.com/masterthenec and search for Kenny Clamps --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https...
Electrical Exam Prep | Pass Your Electrical Master Electrician Exam
April 13, 2022 16:47 - 1 hour - 105 MBTo discover more about master electrician and journeyman electrician electrical exam preparation training, PLEASE check out: ➡ https://www.electricalcodeacademy.net/fasttraxprogram Get our Fast Trax Exam Prep Course today and Pass That Exam at www.FastTraxSystem.com The video is all about electrical exam preparation training but also try to cover the following subject: -electrical exam preparation -understanding the national electrical code -national electrical code Youtube is t...
Electrical Exam Preparation | Using the Fast Trax NEC Learning System
April 13, 2022 16:44 - 48 minutes - 44.6 MBTo discover more about master electrician and journeyman electrician electrical exam preparation training, PLEASE check out: ➡ https://www.electricalcodeacademy.net/fasttraxprogram Get our Fast Trax Exam Prep Course today and Pass That Exam at www.MasterTheNEC.com The video is all about electrical exam preparation training but also try to cover the following subject: -electrical exam preparation -understanding the national electrical code -national electrical code Youtube is ...
Let's ASk Paul | Epsiode 50 | Dedicated Equipment Space and Raceways Aboveground on the Earth
March 29, 2022 02:24 - 51 minutes - 70.9 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via PaulAbernathy.com. The Let's Ask Paul portal dedicated to answering electrical code related questions for electricians and electrical contractors. Now, in this episode Paul will address a question about dedicated equipment space and the running of raceways on the surface as well as being direct buried. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify...
Let's Ask Paul | Episode 49 | General Contractor learning electrical to aid in hiring electricians
March 29, 2022 02:20 - 24 minutes - 33.3 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he talks all things electrical based on submitted questions via the PaulAbernathy.com portal. Today's question is about learning the NEC when not an electrician as well as how do I hire and identify a qualified electrician. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 48 | Getting NM-B Into an Exterior Panel and Neutral Sizing Question
March 12, 2022 22:17 - 40 minutes - 55.3 MBListen as Paul Abernathy, CEO and Founder of the nation’s leading electrical exam preparation and National Electrical Code learning system called the Fast Trax® answers more questions submitted from the www.PaulAbernathy.com portal Ask Paul. In this episode, Paul answers a question about getting to an exterior electrical panel with NM-B and MC and his opinions and options as well as a question about neutral loads and how to address the changes in table 220.12 and the note under the table when...
Fast Trax® Electrical Exam Preparation | Electrical Exam Prep Program
March 08, 2022 21:04 - 59 minutes - 54.9 MBFind out more about "journeyman electrician exam" and "master electrician exam" you need to check out: ? https://www.electricalcodeacademy.net Our video is about journeyman electrician exam topic valuable information but we try to cover the following subjects: -electrician exam -journeyman electrician -electrician journeyman -master electrician exam -electrician master So you would like to know more about journeyman electrician exam, I did too and here is the result. Journeyman electricia...
Electrify™ | Wiring A Kitchen for Electicians and Electrical Contractors
March 03, 2022 15:50 - 1 hour - 102 MBJoin Paul Abernathy on an episode where they talk Kitchens. In this episode the hosts will cover common topics on electrical wiring to kitchens and the National Electrical Codes that are associated with this Kitchens. Be sure to visit www.ElectricianLIVE.com for a list of all our videos and podcasts for Electricians. We have shows on Electrical Exam Preparation as well as for post licensing topics such as grounding and bonding. We even have access to the Ask Paul Podcast as well. --- Send ...
Electrify™ | Just because someone says it's Code do you always listen and More
March 03, 2022 15:29 - 1 hour - 95.5 MBListen as Paul Abernathy and Jay Grundberg talk about when someone quotes the electrical code or makes a reference to it do you really listen to them and trust their knowledge of the National Electrical Code or do you verify yourself. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Electrify™ | How To Use The Fast Trax Electrical Exam Preparation Program
March 03, 2022 15:22 - 59 minutes - 54.9 MBWatch as Paul Abernathy walks you along a journey of finding answers to common code questions in the National Electrical Code and how the Fast Trax Program works. Paul uses is Fast Trax Program questions to help lookup and think about electrical exam prep. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4...
Coffee Hour | Single Family Dwelling Calculations
March 03, 2022 15:18 - 1 hour - 93 MBJoin Paul Abernathy for a great episode on Single Family Dwelling Calculations. To listen to all our episodes and watch our videos check out www.ElectricianLIVE.com for links to all our platforms. --- Send in a voice message: https://anchor.fm/electricianlive/message Support this podcast: https://anchor.fm/electricianlive/support Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 47 | When do you count neutrals as current carrying conductors
February 24, 2022 23:03 - 20 minutes - 28.8 MBListen as Paul Abernathy, CEO and Founded of Electrical Code Academy, Inc. answers questions submitted from PaulAbernathy.com. This episode answers the submitted question of when you actually count the neutral conductor as a current-carrying conductor. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 46 | Grounding Electrode Conductors in Metal Raceways with PVC Boxes
February 24, 2022 22:48 - 27 minutes - 37.7 MBListen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GECs and when they are installed in metal raceways, and how it affects the installation with PVC boxes. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 45 | GFCI's and distances to sinks through doorways and growth advice
February 24, 2022 22:42 - 33 minutes - 46.5 MBListen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GFCIs and within 6' of sinks, and tips on growing your electrical business as requested by a listener. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 44 | Conductor Ampacity and Conditions of Use Questions
February 13, 2022 22:12 - 36 minutes - 50.3 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about adjustments and corrections for a conductor based on the 2020 National Electrical Code. Be sure to have your NEC handy on this one or just enjoy the show and buckle up. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Let's Ask Paul | Episode 43 | Electrical Exam Preparation Assumptions and AFCI's on Upgrades
February 12, 2022 19:32 - 24 minutes - 34 MBListen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the premier electrical exam preparation and National Electrical Code learning provide in the electrical code industry. Today's podcast answers questions submitted by listeners at www.PaulAbernathy.com and they target assumptions on an electrical exam for service calculations, we also answer that AFCI question for service changes or upgrades in this episode. Sit back and enjoy the show. Become a supporter of this podc...