![WTFFF?! 3D Printing Podcast Volume Two: 3D Print Tips | 3D Print Tools | 3D Start Point artwork](https://is2-ssl.mzstatic.com/image/thumb/Podcasts113/v4/64/46/a2/6446a2c3-3407-7310-819c-0e9a06537a74/mza_13056697717576737352.jpg/100x100bb.jpg)
3D Printing with Flexible Materials
WTFFF?! 3D Printing Podcast Volume Two: 3D Print Tips | 3D Print Tools | 3D Start Point
English - April 12, 2016 10:00 - 14 minutes - 13 MB - ★★★★★ - 1 ratingTech News News Technology Homepage Download Apple Podcasts Google Podcasts Overcast Castro Pocket Casts RSS feed
Previous Episode: Good 3D Design is Hard to Find
It can be difficult controlling your print when you use flexible materials, including support materials which can often inherently be a softer material. For this Tech Tuesday episode Tom and Tracy are sharing their tips on getting a good print with flexible filament and discussing a recent 3D print meet up with CM3D where Make-It and FeelColor Filament were debuting a new filament line.
To send us a message, go to 3dstartpoint.com or shoot us a message at [email protected] or on our facebook or twitter! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!