Tech Tips Presented by Evercoat

Episode 30: Troubleshooting Cracked Filler

April 02, 2024 13:20 - 8 minutes - 11.6 MB

In this episode, Tim talks about cracking filler. Learn why your filler cracking and what you can do to avoid cracking it!

Episode 29: Troubleshooting Filler/Putty Curing Issues

March 19, 2024 18:39 - 14 minutes - 21.2 MB

Tim takes you through some common issues when it comes to curing your product. You will learn more about what went wrong and steps you can take to avoid issues in the future.

Episode 28: Changes to the Evercoat Training Portal for Our French and Spanish Customers

December 29, 2023 14:43 - 4 minutes - 5.87 MB

Tim talks about the most recent update to the Evercoat Training Portal to help our Spanish and French-speaking customers have a better user experience. Tim talks about the update at the bottom of the site for converting the website and the training to the selected language and also how international customers can select their home country when registering for an account.

Episode 27: What Does Sand Time Mean, and Can You Cheat the Time?

December 29, 2023 14:42 - 5 minutes - 8.17 MB

Tim talks about a recent Tech Question about applying a product over a product without sanding and why it’s best to sand between layers.

Episode 26: Can You Wet Send a Polyester Primer

December 18, 2023 19:53 - 4 minutes - 7.1 MB

Can you wet sand a polyester primer? Tim talks through the reason why it is not recommended to wet sand Evercoat Polyester Primers.

Episode 25: How To Read New Evercoat Batch Codes

December 06, 2023 16:10 - 3 minutes - 5.25 MB

Tim breaks down how to read the new batch codes for Evercoat products.

Episode 24: Can a Polyester Filler Be Applied to a Polyester Filler?

November 29, 2023 13:29 - 8 minutes - 12.1 MB

Tim talks about the compatibility of putting a polyester filler or putty over a polyester primer if an area is missed and caught after the primer is applied.

Episode 23: Proper Filler Storage and Mixing Procedures

November 21, 2023 13:15 - 6 minutes - 8.66 MB

Tim talks about the proper way to mix a new can of Evercoat Filler and the proper ways to store the product when not in use.

Evercoat Slow Cream Hardener

July 24, 2023 19:42 - 3 minutes - 5.79 MB

Tim talks about the new Evercoat Slow BPO cream hardener and how it can help to increase productivity by providing more working time. As Tim’s buddy used to say, sometimes you have to slow down to go faster.

Episode 22: Evercoat Slow Cream Hardener

July 24, 2023 19:42 - 3 minutes - 5.79 MB

Tim talks about the new Evercoat Slow BPO cream hardener and how it can help to increase productivity by providing more working time. As Tim’s buddy used to say, sometimes you have to slow down to go faster.

Episode 21: Quick Tip for how to use 440 Express

July 05, 2023 16:03 - 4 minutes - 6.53 MB

Tim breaks down what the #439 Foam Applicator Pad is and why it is so important when using 440 Express and Light Speed LED Cure 440 Express.

Episode 20: Application to OEM Paint

November 19, 2022 17:31 - 3 minutes - 4.64 MB

Tim talks about the range of Evercoat products that are approved to be applied over sanded OEM Coatings, and preview the new Tech Tip with the full list of products on the newest Tech Tip on Evercoat.com.

Episode 19: Fiber Reinforced Fillers Tech Tip Adjustment

November 18, 2022 17:07 - 4 minutes - 6.29 MB

Tim takes the time to review the fiber-reinforced fillers and their application over a “proper weld,” explains what a “proper weld” is, how to do it, and epoxy primer pre-coats, and how it all correlates to the Evercoat Fiber Reinforced Filler Tech Tip.

Episode 18: Work Time & Temperature

November 14, 2022 20:12 - 8 minutes - 11.2 MB

How does the work time relate to the temperature and sanding time for the EVERCOAT Products? Tim talks through the range of products and their working times compared to gel times, sanding times, and primer times. Then Tim covers some tips and tricks to help deal with using polyester fillers in the summer with high heat.

Episode 17: Aluminum Repair Products From Evercoat

August 09, 2022 15:08 - 4 minutes - 6.78 MB

Evercoat has been making products that work with aluminum for over 40 years. Tim talks through the products and their differences and give some pointers for repairing some of the newer aluminum panels.

Episode 16: EVERCOAT Optex® Technology

July 29, 2022 12:43 - 7 minutes - 10.1 MB

What is the Optex® Technology from EVERCOAT and how can it help in the repair process? Tim talks through the Optex® Fillers and Primer to help explain the product differences and how they can be used to help through the repair process for their color-changing and sanding features.

Episode 15: Reinforced and Specialty Fillers

July 21, 2022 14:04 - 16 minutes - 22.5 MB

What are the fiberglass reinforced fillers from EVERCOAT, what are their differences, and how to use them? Tim walks through the differences, where they can be used, and some tricks for using them along with the specialty fillers (Vette Panel Adhesive/Filler and Metal-2-Metal) for their proper application and usage.

Episode 14: Light Speed System FAQs

July 14, 2022 15:01 - 15 minutes - 22 MB

Since the launch of the EVERCOAT Light System™ at the 2021 SEMA Show there have been some questions about the products so Tim takes some time to address some of the top ones for the Optex® Light Speed™ Premium Filler, Light Speed™ 440 Express and Light Speed ™ LED Cure High Build Primer.

Episode 18: Work Time to Temperature

June 24, 2022 13:00 - 8 minutes - 11.9 MB

How does the work time relate to the temperature and sanding time for the EVERCOAT Products? Tim talks through the range of products and their working times compared to gel times, sanding times, and primer times. Then Tim covers some tips and tricks to help deal with using polyester fillers in the summer with high heat.

Episode 13: How to Avoid Ghost Mapping

June 23, 2022 16:54 - 13 minutes - 19 MB

Tim talks about ghost mapping to explain what it is and what causes it, then talks about ways to avoid your repairs from showing up after paint. Tim talks about creating the correct bevel edge for fiberglass and composite repairs, and some tips and tricks to get the best repair possible.

Viscosity Adjustment | Episode 12

December 20, 2021 16:01 - 14 minutes - 20.9 MB

Ever tried to thicken or thin an Evercoat Filler or Putty? Ever wondered if it could be done and how to go about doing it correctly. This month Tim talks about why and how to go about doing it the right way, and why to avoid the incorrect ways that cause problems.

The Light Speed System | Episode 11

December 10, 2021 14:52 - 6 minutes - 8.79 MB

Tim talks about the new Evercoat Light Speed™ Repair System. This new innovative system allows repairs to go from damage to primer in less than 30 minutes, using the power of light to accelerate the repair process. Tim reviews the new Light Speed™ Optex® Premium Filler with a 3-minute cure, the new Light Speed™ 440 Express that cures in just 30 seconds, and Light Speed™ LED Cure High Build Primer that is ready to spray right out of that can and cures in 5 minutes.

Changing Weather | Episode 10

November 10, 2021 15:25 - 10 minutes - 11.8 MB

Tim talks about the change of seasons and the changes in the weather to address some of the issues that technicians deal with. This month Tim covers some helpful tips like application temperatures for polyesters, some ideas for ensuring that all your repairs go without a hitch and some things to not do to help avoid those pitfalls.

SATA Spray Guns | Episode 9

October 04, 2021 13:23 - 44 minutes - 46.6 MB

Tim McKinney and Chris Springer discuss Evercoat polyester primers and their applications with SATA spray guns. Chris reviews each spray gun and breaks down the differences between HVLP and RP spray guns, discusses spray gun inlet pressures, and shows how to balance a spray gun. Tim and Chris break down some of the myths and confusions regarding spray equipment and polyester primers, review the recommendations then share some tips and tricks for spraying polyester primers with SATA equipment...

Gel Coat | Episode 8

August 26, 2021 13:10 - 13 minutes - 20.1 MB

The boating season is still going strong, but some boaters have had questions about gel coat repairs and how to do them. Tim recalls a phone call from a friend about how to do a repair, and takes the time to talk through the key points for doing a quality gel coat repair.

Gel Coat Repair | Episode 8

August 26, 2021 13:10 - 13 minutes - 20.1 MB

The boating season is still going strong, but some boaters have had questions about gel coat repairs and how to do them. Tim recalls a phone call from a friend about how to do a repair, and takes the time to talk through the key points for doing a quality gel coat repair.

Optex Filler & Putty and Proper Use of 440 Express feat. Jeremy of Booth Talk | Episode 7

July 26, 2021 19:33 - 53 minutes - 49.2 MB

Tim and Jeremy Winters of Booth Talk talk about the Optex Filler and Putty and the use proper use of 440 Express. Booth Talk Podcast: https://www.podbean.com/ew/pb-zxhty-ef7807 440 Express Application: https://youtu.be/xs10X-jOOi4

Optex Filler & Putty and Proper Use of 440 Express feat. Jeremy of Booth Talk

July 26, 2021 19:33 - 53 minutes - 49.2 MB

Tim and Jeremy Winters of Booth Talk talk about the Optex Filler and Putty and the use proper use of 440 Express. Booth Talk Podcast: https://www.podbean.com/ew/pb-zxhty-ef7807 440 Express Application: https://youtu.be/xs10X-jOOi4

Tech Tips Presented by Evercoat Podcast Ep 6: Summer Heat

June 29, 2021 13:57 - 5 minutes - 8.85 MB

Fighting the summer heat? Tim talks about some tips and tricks to deal with applying EVERCOAT Products in the summer heat.

Talking Primers feat. Jeremy of Booth Talk | Episode 5

May 24, 2021 16:49 - 43 minutes - 80 MB

Tim and Jeremy of Booth Talk candidly talk about the differences between urethane and polyester primers and the benefit of polyester primers for the collision and restoration shops. Listen in for their discussion on the evolutions of polyester primers, application tips and tricks, and Evercoat’s progress up to the new 4:1 Polyester Primer with a built in guide coat.

Resin and Gel Coat - Tech Tips Presented by Evercoat | Episode 4

April 26, 2021 14:20 - 17 minutes - 14.3 MB

Ever wondered what the difference was between a laminating resin and a finishing resin, or a laminating gel coat and a finishing gel coat? Tim with Evercoat breaks down the differences and also shares some tips and tricks for using Evercoat resins and gel coats for fiberglass repairs.

Resin and Gel Coat | Episode 4