RWS 93 – Carburettor Icing in Helicopters with Richard Mornington-Sanford

Most piston engine pilots will be at least passingly familiar with the theory behind the formation of carburettor icing. However most textbooks lean towards the operation of the carburettor in a fixed wing mounted engine. Helicopter engines, predominately the Robinson helicopter types but applicable to others as well, have their own unique challenges when it …

Continue reading "RWS 93 – Carburettor Icing in Helicopters with Richard Mornington-Sanford"

The post RWS 93 – Carburettor Icing in Helicopters with Richard Mornington-Sanford appeared first on The Rotary Wing Show Podcast.

Richard Mornington-Sandford – flight instructor and engineering trainer has a long history working with the Robinson brand.

Most piston engine pilots will be at least passingly familiar with the theory behind the formation of carburettor icing. However most textbooks lean towards the operation of the carburettor in a fixed wing mounted engine. Helicopter engines, predominately the Robinson helicopter types but applicable to others as well, have their own unique challenges when it comes to carburettor icing and the use of ‘carb heat’ warm air.   

Richard Mornington-Sanford was an engineer in the RAF before branching out into the roles of a civilian flight instructor, licensed helicopter engineer and air accident investigator. A photo on his website has an endorsement from Frank Robinson in 1998 with at that point, 18 years of association with the Robinson Helicopter Company and its products. Richard is still conducting Robinson Pilot Flight Safety Courses around the world today. You can do the maths on the years of experience there.

From his website – “He is a Robinson Helicopters Accident/Technical Investigator and conducts the Robinson Factory Maintenance Course in the UK, Europe and Worldwide together with EASA Part 147 type training approval. With CAA engineering and flight instructor licences, he is credited with having unrivalled experience outside of the factory on the Robinson product.”

Anyway, all that to say that the guy knows a bit about the innards of the Robinson product. I stumbled upon a 2012 PDF guide that Richard had written about carburettor icing only in the last few months. What stood out to me was that it was the first time that I had seen the topic of carb icing covered from a purely helicopter engine and helicopter operation view point. It was fascinating stuff and somewhat humbling that I hadn’t previously been exposed to some of the ideas the guide had in it.

Fig 1 to the right is taken from Richard’s guide. You can download the full guide and see additional photos, drawings and graphs by clicking on the cover image immediately below.

Very briefly – the carburettor is designed to deliver a fuel/air mixture to the engine pistons for combustion. If that air mass is sufficiently blocked by icing then combustion stops. Not a good thing.

Even on a warm day the air moving through the carburettor can experience a significant temperature drop due to 1. the latent heat absorbed from the air as the fuel vaporises, and 2. the reduction in temperature and pressure as the air rushes through the venturi effect created by a less than full open butterfly valve.

Now a big difference between the textbooks (which are fixed wing centric) and what happens in a Robinson R22 or R44 is that the books say that during takeoff there is very little chance of carb icing due to the high power setting and full open butterfly valve. However! In the R22 and R44 because of the de-rated engine, at sea level at takeoff power the butterfly valve is a long way from being fully open. How far? Look at Richard’s charts in the document below to find out.

Download Richard’s guide on carburetor icing in helicopters by clicking on the image above.

In this podcast we cover:

Causes of carbuettor icing and conditions that it is more likely to occurWhy helicopter engines are difference to fixed wing when it comes to icingThe history behind the Robinson R44 carb heat assist controlCorrect use of carb heat and why you must bring it on earlyMAP limits vs BHP limits and relevant safety noticesInsight into development of the takeoff power range limitation in helicopters

Richard conducting a Robinson Helicopter Company Safety course in Russia

Podcast: Subscribe in iTunes | Play in new window | Download

Links from this week’s episode:
Support the podcast on Patreon
Mornington Sanford Aviation – Richard runs a number of safety and engineering courses. You can find out more on his website and there is a good collection there of blog posts that are well worth reading.

Richard doubling up as pilot and engineer for this track and balance.

This photo and one below – Richard in Thailand supervising assembly.

What was your biggest takeaway from this episode? Help yourself remember and share it with others by making a comment about it here below.

The post RWS 93 – Carburettor Icing in Helicopters with Richard Mornington-Sanford appeared first on The Rotary Wing Show Podcast.